Infresco Temperature Sensor IP65

Description

Infresco temperature sensor IP65 is an optional sensor to add to the Infresco variable controller to create along with the PIR sensor an automated infrared quartz heater control system. Where both sensors are added to the variable controller heaters will only come on when movement is detected and the ambient temperature is below the set point eg 16 degrees. Taking a  Community Hall as an example which is fitted with 4 No. Tansun Monaco 1.5 kW heaters (other heaters could be used) these heaters would be paired with the 6kW Infresco variable controller, the PIR sensor and the Temperature sensor – in this case the heaters would turn on automatically only when movement is detected and the temperature is less than the temperature set point eg 16 degrees.

Infresco Temperature Sensor IP65 is an outside air temperature sensor designed to interface with a wide variety of HVAC control equipment. Units are available with a high quality thermistor element or with an active linear output.

When properly installed, the sensor housing offers IP65 protection against water and particulate ingress. The element is mounted within a thermally conductive bead through the side of the housing in a waterproof shield to ensure accurate measurment of external conditions.

Features

IP65 Housing (square and round options)

Large range of sensor options

Accurate sensing of external temperature

Direct Fixing (No extra brackets required)

Manufactured from flame retardant ABS

Interface with Infresco Variable Heater Controllers Models:

•  4Kw Infresco IR Power Regulator – Manual Control Version 
• 4Kw Infresco IR Power Regulator –  Remote Control Version
• 6kW Infresco IR Power Regulator – Manual Control Version
• 6kW Infresco IR Power Regulator – Remove control Version

Additional information