Herschel iQ R2 Wireless Receiver

  • Intelligent ControlEnergy Saving System
  • Heat Specific Rooms and Zones
  • Controls up to 2.3kW of Infrared Heaters on 230V
  • Latest Wireless Technology | 200M Wireless Range
  • 1 hour Boost function & Open-Window Detection
  • 10 Amp Maximum Load | Radio Frequency 433Mhz

 

£38.00

Pay monthly for this product with Moorgate Finance.

Not sure which wattage to buy? Check out our Watt Calculator.

SKU: 404061373/T-R1 Categories: , , , ,

Description

Herschel iQ R2 receiver is an integral part of the  Herschel IQ Control System now with optional WiFi control through the SmartLife app. Herschel Infrared controllers have been manufactured with the latest wireless and WiFi technology to turn your new Herschel infrared panel heaters into a cutting edge, energy-saving heating system! Herschel have created a novel combination of stylish and efficient heaters with a comprehensive, flexible and cost effective control system. This is unique to the market.

Conventional convection heating cannot be zone controlled, as an average temperature will be set and heated air will disperse uncontrollably. The benefit of the IQ system is that each heater has its own thermostat, therefore can be independently controlled. Any room can be any temperature, or not heated at all. For example: the lounge and bedroom heaters could be turned on but as the dining room won’t be used it can be kept off. Within this, the bedroom could be set at 20 degrees and the lounge at 23 degrees. Energy is only used when the Herschel panel is switched on. Herschel heaters can be linked together to form a zone. For example 2 or more heaters in one room, or even two separate zones in one large room. Then each zone can be controlled by a separate Herschel thermostat connected to the heaters within that zone. Just think how much energy and money you may waste each year by heating areas that are only used infrequently or by running a central boiler to heat just 1 or 2 rooms. Do not worry, these are simple to operate!

Note: Purchase R2 receivers if you wish to control additional heaters from your T2 Thermostat. The Single Zone Starter Pack contains 1 Herschel iQ T2 Wireless Thermostat and 1 Herschel iQ R2 Wireless Receiver, the R2 can control up to 2.3kW of Infrared heaters.

The Herschel iQ R2 Receiver is designed to be used in conjunction with the T2 Wireless Thermostat to control Herschel infrared heaters. The intelligent control created by Herschel is a highly energy efficient and effective way of controlling the heating in your house, building, or outside area. Herschel is about comfort, control, efficiency & style. Herschel Infrared Heaters Together With The iQ Single Zone Starter Pack are Fully Compliant With Ec Directive 2009/125/Ec For Eco design Of Local Space Heaters.

Features

– 200m wireless range (if unobstructed)
– Internal temperature sensor
– 1 hour Boost function
– Herschel’s latest open-window detection function

The R2 can control up to 2.3kW of Infrared heaters (10 amps) on a 230 volt circuit. Additional R2 Wireless receivers can be added to the same T2 Thermostat to expand your control to additional zones. They will all receive the same instruction from a T2 Thermostat.

Get The Most From Your Herschel Heaters By Adding The iQ System. Starting With Just One Heater In One Room – Add As Many Devices As You Want.  Over Time  Get Full Control Of Your Home’s Energy Use. Up To 36 R2 Receivers May Be Added. These Can Control Up To 2.3Kw Each Or More Heaters Via Relay-Switched Circuit2. See Smart Life App review here

Installation & Set Up

Additional information

Dimensions 8.5 × 3.5 × 8.5 cm

You may also like…