Danlers Exterior IP Time Lag Switch

Time Lag: Adjustable from 2 to 20 minutes
Supply Voltage: 230VAC
Weatherproof: IP66 rating
Maximum Load: 16 amps (4.0kW) of quartz heaters.
Dimensions: 120 x 90 x 60mm



Pay monthly for this product with Moorgate Finance.

Not sure which wattage to buy? Check out our Watt Calculator.

Categories: , , , ,


The Danlers Exterior IP rated Time Lag Heater Switch is ideal for energy saving control of exterior heaters and exterior lighting, and which is also suitable for damp areas indoors. Pressing the touch sensitive area brings the connected load on. The load is then switched off automatically after the time lag has elapsed. This is a top quality push button unit with illuminated touch area for easy location in the dark. Tough, hard wearing, with an IP66 rated polycarbonate moulding. It is perfect for robust day to day commercial use.

Maximum Load: 16 amps (4000W) of quartz heaters. 12 amps (3000W) of fluorescent. 2 amps (500W) of most metal halide lamps. Connect a Quartz outdoor heater such as the Tansun Sorrento to a Danlers exterior Time Lag Switch.

The Danlers exterior time lag heater swith can be wall mounted on an outside wall, and through proper insulation an IP66 rating can be achieved. The unit is vandal proof as it has no moving parts. The switch incorporates an illuminated ‘Touch Here’ push button which remains lit until pressed. Once pressed the unit will switch on the connected load.During the last 20 seconds of the time lag period the illuminated LEDs will flash, if the ‘touch Here’ area is not touched the load will then swtich off. The timer can be re-started at any point during the time lag period by touching the ‘Touch Here’ area. The load will NOT be switched on permanently by an object being placed over the ‘Touch Here’ area – the load will only switch on again if the object is removed and the ‘Touch here’ is re-touched.

The time lag can be adjusted from 2 to 20 minutes via an internal adjuster. An option to our stocked unit is the EXTLSW 16 A 10H unit which will adjust from 1 to 10 hours – please send an e mail to request this here. The Danlers Exterior Time Lag Heater Switch must be mains powered and requires a Neutral connection. The unit switches the mains through to the load.


Click Here for the Danlers Time Lag Heater Switch Technical Info!