Herschel iQ R1 receiver is an integral part of the Herschel IQ Control System. Herschel Infrared controllers have been manufactured with the latest wireless technology to turn your new Herschel infrared panel heaters into a cutting edge, energy-saving heating system! Herschel have created a novel combination of stylish and efficient heaters with a comprehensive, flexible and cost effective control system. This is unique to the market.
Conventional convection heating cannot be zone controlled, as an average temperature will be set and heated air will disperse uncontrollably. The benefit of the IQ system is that each heater has its own thermostat, therefore can be independently controlled. Any room can be any temperature, or not heated at all. For example: the lounge and bedroom heaters could be turned on but as the dining room won’t be used it can be kept off. Within this, the bedroom could be set at 20 degrees and the lounge at 23 degrees. Energy is only used when the Herschel panel is switched on. Herschel heaters can be linked together to form a zone. For example 2 or more heaters in one room, or even two separate zones in one large room. Then each zone can be controlled by a separate Herschel thermostat connected to the heaters within that zone. Just think how much energy and money you may waste each year by heating areas that are only used infrequently or by running a central boiler to heat just 1 or 2 rooms. Do not worry, these are simple to operate!
Note: Purchase R1 receivers if you wish to control additional heaters from your T1 Thermostat. The Single Zone Starter Pack contains 1 Herschel iQ T1 Wireless Thermostat and 1 Herschel iQ R1 Wireless Receiver, the R1 can control up to 2.3kW of Infrared heaters.
The Herschel iQ R1 Receiver is designed to be used in conjunction with the T1 Wireless Thermostat or WH1 Central Control Unit in order to control Herschel infrared heaters. The intelligent control created by Herschel is a highly energy efficient and effective way of controlling the heating in your house, building, or outside area. Herschel is about comfort, control, efficiency & style. Herschel Infrared Heaters Together With The Iq Single Zone Starter Pack Or Wh1 Central Control Unit Are Fully Compliant With Ec Directive 2009/125/Ec For Ecodesign Of Local Space Heaters.
– 200m wireless range (if unobstructed)
– Internal temperature sensor
– 1 hour Boost function
– Herschel’s latest open-window detection function.
The R1 can control up to 2.3kW of Infrared heaters (10 amps) on a 230 volt circuit. Additional R1 Wireless receivers can be added to the same T1 or WH1 Central Control Unit to expand your control to additional zones. They will all receive the same instruction from a T1 Thermostat and will all be individually controllable using a WH1 Central Control Unit.
Get The Most From Your Herschel Heaters By Adding The Iq System. Starting With Just One Heater In One Room – Add As Many Devices As You Want* Over Time To Get Full Control Of Your Home’s Energy Use.* Up To 36 R1 Receivers May Be Added. These Can Control Up To 2.3Kw Each Or More Heaters Via Relay-Switched Circuit.