circle-o-notch as user paypal search arrow-left arrow-right arrow-up arrow-down twitter facebook angle-left angle-right angle-up angle-down shopping-basket

Infresco P-4kW Passive Infrared Controller

£131.60

Intelligent Control | Energy Saving | Max Load 4kW

Extends Lamp Life | Soft-Start/ Zero-Voltage Switch Off

Temperature Sensor Turns Lamps Off at Set Ambient Temperature

Easy to Install | Relatively Maintenance Free

 

Description

The Infresco P-4kW passive infrared controller is part of a family of controllers designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The ‘P’ model has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1°C and 60°C.

The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Installation of the unit is simple and once installed is relatively maintenance-free.

Click here for the Infresco P-4kW Passive Infrared controller User Manual!

Supply Voltage: 230VAC +/- 10% @ 50/60Hz
Switching Capacity: 4kW Max.
Detection Range: 5 metres
Detection Angle: 100°
Temperature Set Point: 1 to 60°C
Lamp On-Time: 5 Minutes (fixed)
Current Consumption (control circuit): 50mA
Terminals: 2.5mm2 Rising Clamp
Operating Temperature: -20 to 40°C
Protection Rating: IP65
Gland Diameter Max Cable Entry: 2.5mm
Enclosure Dimensions (WxLxH): 100x100x60 (mm)

Reviews

There are no reviews yet.

Be the first to review “Infresco P-4kW Passive Infrared Controller”

Your email address will not be published. Required fields are marked *